PartsTable
Technical Data Sheet
Download PDF

488056 — BRACKET,ANGLE

✓ Government record, cited
Legrand · ORING SEAL
PRODUCT OVERVIEW

488056: BRACKET,ANGLE.

The BRACKET,ANGLE is a Legrand industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS AND TAPERED, first_leg_width: 0.604 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN, first_leg_length: 0.765 INCHES MINIMUM AND 0.848 INCHES MAXIMUM IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-075-4002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
488056
NSN: 5340-00-075-4002
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS AND TAPERED
first_leg_width0.604 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN
first_leg_length0.765 INCHES MINIMUM AND 0.848 INCHES MAXIMUM IN
second_leg_styleCORNER RADIUS
second_leg_width1.452 INCHES MINIMUM AND 1.576 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.110 INCHES MINIMUM AND 1.192 INCHES MAXIMUM IN
first_leg_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
first_leg_end_radius0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
second_leg_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
NSN5340-00-075-4002
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 488056 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 1.452 INCHES MINIMUM AND 1.576 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.110 INCHES MINIMUM AND 1.192 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
SECOND LEG WIDTH1.452 INCHES MINIMUM AND 1.576 INCHES MAXIMUM IN
SECOND LEG LENGTH1.110 INCHES MINIMUM AND 1.192 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3P50004-191Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 488056?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 488056?
488056 is a BRACKET,ANGLE manufactured by Legrand.
What parts can replace 488056?
There is 1 known substitute for 488056: 3P50004-191. Substitute compatibility should be verified for your specific system.
What is the NSN for 488056?
488056 is cataloged in the U.S. Government catalog under NSN 5340-00-075-4002. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 488056

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.