PartsTable
Technical Data Sheet
Download PDF

488004 — BRACKET,ANGLE

✓ Government record, cited
Legrand · ORING SEAL
PRODUCT OVERVIEW

488004: BRACKET,ANGLE.

The BRACKET,ANGLE is a Legrand industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, first_leg_length: 0.705 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-079-4940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
488004
NSN: 5340-00-079-4940
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
first_leg_length0.705 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
second_leg_styleEND RADIUS
second_leg_width0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.705 INCHES MINIMUM AND 1.745 INCHES MAXIMUM IN
first_leg_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
first_leg_end_radius0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
second_leg_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
NSN5340-00-079-4940
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 488004 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.705 INCHES MINIMUM AND 1.745 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
SECOND LEG WIDTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
SECOND LEG LENGTH1.705 INCHES MINIMUM AND 1.745 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3P50004-203Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 488004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 488004?
488004 is a BRACKET,ANGLE manufactured by Legrand.
What parts can replace 488004?
There is 1 known substitute for 488004: 3P50004-203. Substitute compatibility should be verified for your specific system.
What is the NSN for 488004?
488004 is cataloged in the U.S. Government catalog under NSN 5340-00-079-4940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 488004

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.