PartsTable
Technical Data Sheet
48645 ✓ Verified by PartsTable
Unold · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

For fans of the classic style, there is a high-quality stainless steel pot. It is equipped with a splash guard and fork holder. If you prefer cheese or chocolate fondue, you can use the fireproof ceramic pot.

Practical: the plastic ring, which has space for six pots for sauces and dips. The ceramic pots are also included. There are also eight stainless steel fondue forks with color markings.

The temperature is infinitely adjustable. All non-electrical parts are dishwasher safe. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-272-3548, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
48645
NSN: 5340-00-272-3548
FSC: 5340
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
body_styleANGLE SHAPE, W/O CABLE CLAMP
shell_materialSTEEL COMP 303
first_end_styleCHAMFERED
contact_materialCOPPER ALLOY 173 SINGLE MATING END ALL CONTACT GROUPINGS
overall_diameter0.550 INCHES NOMINAL IN
special_featuresEND ITEM VERTICALSTABILIZER
terminal_locationFRONT ALL MATING ENDS ALL CONTACT GROUPINGS
pin_overall_length7.6900 INCHES NOMINAL IN
mating_end_quantity1
pin_overall_diameter1.7500 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5340-00-272-3548
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 48645 MFR: Unold ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
LENGTH UNDER SHOULDER: 0.380 INCHES NOMINAL IN
CLOSED END OVERALL DIAMETER: 0.620 INCHES NOMINAL IN
MATERIAL: PLASTIC, POLYETHYLENE (PP)
OPEN END INSIDE DIAMETER: 0.369 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONAIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); AIRCRAFT, STRATOFORTR
LENGTH UNDER SHOULDER0.380 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR RED
CLOSED END OVERALL DIAMETER0.620 INCHES NOMINAL IN
MATERIALPLASTIC, POLYETHYLENE (PP)
OPEN END INSIDE DIAMETER0.369 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
EC6Upgraded Successor
successor cross-reference
successor
742-6Upgraded Successor
successor cross-reference
successor
115-9-6Upgraded Successor
successor cross-reference
successor
048645Interchangeable
interchangeable cross-reference
interchangeable
48645Interchangeable
interchangeable cross-reference
interchangeable
SD48645Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 48645?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48645?
48645 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Unold.
What parts can replace 48645?
There are 9 known substitutes for 48645: EC6, 742-6, 115-9-6 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 48645?
48645 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-272-3548. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48645