48633-2 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

48633-2: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 0.985 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BEARING SHAFT, pilot_length: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN, shaft_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-172-1011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 48633-2

NSN: 5905-00-172-1011
FSC: 5905 — Resistor
CAGE: 10112 — GENERAL DYNAMICS MOTION CONTROL LLC (USA)

SPECIFICATIONS

body_style	CYLINDRICAL SERVO MOUNTED
body_length	0.985 INCHES MAXIMUM IN
shaft_style	ROUND
bearing_type	BEARING SHAFT
pilot_length	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
shaft_length	0.750 INCHES NOMINAL IN
shaft_runout	0.001 INCHES IN
actuator_type	SINGLE SHAFT
body_diameter	2.000 INCHES NOMINAL IN
lateral_runout	0.002 INCHES IN
pilot_diameter	1.8500 INCHES MAXIMUM IN
shaft_diameter	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
NSN	5905-00-172-1011

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 0.60 INCH-OUNCES IN

•

BODY DIAMETER: 2.000 INCHES NOMINAL IN

•

LATERAL RUNOUT: 0.002 INCHES IN

•

ELECTRICAL RESISTANCE PER SECTION: 80.0 KILOHMS SINGLE SECTION

•

MOUNTING LIP DEPTH: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN

•

UNDERCUT WIDTH: 0.0550 INCHES MINIMUM IN

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	0.60 INCH-OUNCES IN
BODY DIAMETER	2.000 INCHES NOMINAL IN
LATERAL RUNOUT	0.002 INCHES IN
ELECTRICAL RESISTANCE PER SECTION	80.0 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
UNDERCUT WIDTH	0.0550 INCHES MINIMUM IN
SECTION QUANTITY	1
SHAFT DIAMETER	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
UNDERCUT DIAMETER	1.850 INCHES MAXIMUM IN
FRAGILITY FACTOR	MODERATELY RUGGED

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 4

440-103-001Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

206Reference document

Same NSN cross-reference

Reference document — Secondary reference

PB75SD002Reference document

Same NSN cross-reference

Reference document — Secondary reference

PB75S0002Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 48633-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 48633-2?

48633-2 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).

What parts can replace 48633-2?

There are 4 known substitutes for 48633-2: 440-103-001, 206, PB75SD002 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 48633-2?

48633-2 is cataloged in the U.S. Government catalog under NSN 5905-00-172-1011. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

48633-2 — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — 48633-2