PartsTable
Technical Data Sheet
Download PDF

486235 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

486235: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.313 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.750 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PHOSPHATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-321-5921, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
486235
NSN: 5340-00-321-5921
FSC: 5340 — Hardware, Commercial
CAGE: 57733 — STEWART-WARNER CORPORATION (USA)
SPECIFICATIONS
diameter0.313 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.750 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPHOSPHATE BAND
material_thickness0.0598 INCHES NOMINAL IN
loop_inside_diameter1.656 INCHES NOMINAL IN
material_document_and_classificationQQ-S-640,T2 OR T5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.875 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.375 INCHES NOMINAL IN
NSN5340-00-321-5921
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 486235 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-640,T2 OR T5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.313 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0598 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.875 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-640,T2 OR T5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.313 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.0598 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.875 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.375 INCHES NOMINAL IN
MATERIALSTEEL BAND
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 486235?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 486235?
486235 is a CLAMP,LOOP.
What is the NSN for 486235?
486235 is cataloged in the U.S. Government catalog under NSN 5340-00-321-5921. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 486235

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.