PartsTable
Technical Data Sheet
Download PDF

48508 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

48508: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, body_material: METAL, bore_diameter: 40.0 MILLIMETERS NOMINAL MM, inclosure_type: ENCASED, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-3584, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 48508
NSN: 3110-00-156-3584
NIINs: 001563584, 011235245, 013490094
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
body_materialMETAL
bore_diameter40.0 MILLIMETERS NOMINAL MM
seal_quantity1
inclosure_typeENCASED
load_directionRADIAL
overall_length5.400 INCHES NOMINAL IN
surface_finishGROUND
inner_ring_width0.9450 INCHES NOMINAL IN
outer_ring_width0.8270 INCHES NOMINAL IN
style_designatorROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
NSN3110-00-156-3584
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 48508 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
OUTER RING WIDTH: 0.8270 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 80.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
OUTER RING WIDTH0.8270 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER80.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SEAL QUANTITY1
SUBSTITUTES & CROSS-REFERENCES 2
ST333Reference document
Same NSN cross-reference
Reference document — Secondary reference
53389DReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 48508?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48508?
48508 is a BEARING,BALL,ANNULAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 48508?
There are 2 known substitutes for 48508: ST333, 53389D. Substitute compatibility should be verified for your specific system.
What is the NSN for 48508?
48508 is cataloged in the U.S. Government catalog under NSN 3110-00-156-3584. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48508