PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 484827
484827 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CUTTER,MILLING,SCREW SLOTTING is a the manufacturer industrial component. Key specifications include length: 0.780 INCHES NOMINAL IN, special_features: 125 MICROINCH SURFACE FINISH, end_item_identification: MC DONNELL AIRCRAFT MODEL A/F-18-DCN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-186-1380, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
484827
NSN: 5310-00-186-1380
FSC: 5310
CAGE: 77294 — PIPER INDUSTRIAL MANUFACTURING COMPANY, LLC DIV PIPER INDUSTRIAL MANUFACTURING COMPANY (USA)
SPECIFICATIONS
length0.780 INCHES NOMINAL IN
special_features125 MICROINCH SURFACE FINISH
end_item_identificationMC DONNELL AIRCRAFT MODEL A/F-18-DCN
NSN5310-00-186-1380
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 484827 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.633 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
MATERIAL: LEATHER OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
THICKNESS: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 2500 POUNDS PER SQUARE INCH LBS
•
OVERALL DIAMETER: 0.890 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.633 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
MATERIALLEATHER OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH2500 POUNDS PER SQUARE INCH LBS
OVERALL DIAMETER0.890 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
41045Interchangeable
interchangeable cross-reference
interchangeable
160164-1Interchangeable
interchangeable cross-reference
interchangeable
17768Interchangeable
interchangeable cross-reference
interchangeable
F567Interchangeable
interchangeable cross-reference
interchangeable
12838Interchangeable
interchangeable cross-reference
interchangeable
FD567Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 484827?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 484827?
484827 is a CUTTER,MILLING,SCREW SLOTTING.
What parts can replace 484827?
There are 23 known substitutes for 484827: 41045, 160164-1, 17768 and 20 more. Substitute compatibility should be verified for your specific system.
Is 484827 still available?
484827 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 484827

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026