PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 48462
48462 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, cone_width: 0.9330 INCHES NOMINAL IN, bore_diameter: 1.5000 INCHES NOMINAL IN, inside_diameter: 3.075 INCHES NOMINAL IN, style_designator: NORMAL ANGLE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3557, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
48462
NSN: 3110-00-100-3557
FSC: 3110
CAGE: 57526 — FORD MOTOR COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
cone_width0.9330 INCHES NOMINAL IN
bore_diameter1.5000 INCHES NOMINAL IN
coil_quantity4
inside_diameter3.075 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0312 INCHES NOMINAL IN
spring_free_length3.000 INCHES NOMINAL IN
spring_solid_length1.750 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_deflection_rate560.000 POUNDS PER INCH NOMINAL LBS
NSN3110-00-100-3557
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 48462 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
CONE WIDTH: 0.9330 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.5000 INCHES NOMINAL IN
CONE WIDTH0.9330 INCHES NOMINAL IN
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
48462Interchangeable
interchangeable cross-reference
interchangeable
208314Interchangeable
interchangeable cross-reference
interchangeable
2-675Interchangeable
interchangeable cross-reference
interchangeable
BA98071Interchangeable
interchangeable cross-reference
interchangeable
DIC-2481Interchangeable
interchangeable cross-reference
interchangeable
DM7404Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 48462?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48462?
48462 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 48462?
There are 28 known substitutes for 48462: 48462, 208314, 2-675 and 25 more. Substitute compatibility should be verified for your specific system.
Is 48462 still available?
48462 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48462

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026