PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4841-1
4841-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, alignment_type: RIGID, overall_height: 0.7187 INCHES NOMINAL IN, surface_finish: GROUND, special_features: CROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200, style_designator: GROOVED RACE SURFACE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1731, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4841-1
NSN: 3110-00-156-1731
FSC: 3110
CAGE: 43766 — SKF INDUSTRIES INC NICE BEARING PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
alignment_typeRIGID
overall_height0.7187 INCHES NOMINAL IN
surface_finishGROUND
special_featuresCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter1.6250 INCHES NOMINAL IN
end_item_identificationENGINE,TURBOFAN,MODEL F100
overall_outside_diameter2.4687 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-156-1731
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4841-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
SURFACE FINISH: GROUND
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 2.4687 INCHES NOMINAL IN
•
BORE SMALLEST DIAMETER: 1.6250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
SURFACE FINISHGROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER2.4687 INCHES NOMINAL IN
OVERALL HEIGHT0.7187 INCHES NOMINAL IN
BORE SMALLEST DIAMETER1.6250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
STYLE DESIGNATORGROOVED RACE SURFACE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
DS-934268Interchangeable
interchangeable cross-reference
interchangeable
4841Interchangeable
interchangeable cross-reference
interchangeable
431-3Interchangeable
interchangeable cross-reference
interchangeable
820D330Interchangeable
interchangeable cross-reference
interchangeable
1GInterchangeable
interchangeable cross-reference
interchangeable
7523Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4841-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4841-1?
4841-1 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 4841-1?
There are 25 known substitutes for 4841-1: DS-934268, 4841, 431-3 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4841-1?
4841-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1731. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4841-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026