48405: WAVEGUIDE ASSEMBLY.
Cat.5e U/UTP PVC network cable with support for bandwidth up to 100MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.5e cable, designed for operating frequencies up to 100MHz. The unshielded version (U/UTP) is designed in its electrophysical parameters (NExT, FExT etc.) in such a way that it can be used for Gigabit Ethernet despite the lack of shielding.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.
A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the skin effect , while the conductor cores are only subjected to very low electrical loads. This allows the us This part is cataloged in the U.S.
Government catalog under NSN 5310-00-817-2503, indicating validated use in U.S. government and defense logistics supply chains.
| material | ALUMINUM ALLOY SINGLE FLANGE |
| nut_style | PLATE NUT SPACER |
| nut_length | 1.125 INCHES NOMINAL IN |
| flexibility | FLEXIBLE SINGLE TUBING SEGMENT |
| plate_width | 0.625 INCHES NOMINAL IN |
| flange_depth | 0.500 INCHES NOMINAL SECOND FLANGE IN |
| flange_quantity | 2 |
| plate_thickness | 0.091 INCHES NOMINAL IN |
| style_designator | STRAIGHT TYPE |
| waveguide_length | 4.538 INCHES NOMINAL IN |
| thru-hole_diameter | 0.400 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN |
| flange_inside_width | 6.500 INCHES NOMINAL FIRST FLANGE IN |
| NSN | 5310-00-817-2503 |
| PLATE THICKNESS | 0.091 INCHES NOMINAL IN |
| NUT LENGTH | 1.125 INCHES NOMINAL IN |
| PLATE WIDTH | 0.625 INCHES NOMINAL IN |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.438 INCHES NOMINAL IN |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.873 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN |
| THRU-HOLE DIAMETER | 0.400 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN |
| NUT STYLE | PLATE NUT SPACER |
| MATERIAL | ALUMINUM ALLOY OVERALL |