Cat.5e F/UTP PVC network cable with support for bandwidth up to 100MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.5e cable, designed for operating frequencies up to 100MHz. With its overall shielding (F/UTP) in the form of a foil, this type of cable has been used reliably for decades in many installations in the prosumer sector as well as in the professional segment, since it can easily be used for Gigabit Ethernet.<br>These cables are manufactured and tested according to the ISO/IEC 11801 specification.
The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the skin effect , while the conductor cores are This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-722-1056, indicating validated use in U.S.
government and defense logistics supply chains.
| material | STEEL OVERALL |
| body_length | 0.750 INCHES NOMINAL IN |
| head_height | 0.188 INCHES NOMINAL IN |
| magnet_width | 0.500 INCHES NOMINAL IN |
| connection_style | PLAIN |
| style_designator | PLUG, MAGNETIC |
| thread_direction | RIGHT-HAND EXTERNAL |
| nominal_thread_size | 0.500 INCHES EXTERNAL IN |
| magnet_projection_length | 0.250 INCHES NOMINAL IN |
| thread_series_designator | NPT EXTERNAL |
| NSN | 5315-00-722-1056 |
| PIN OVERALL DIAMETER | 0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN |
| FIRST END STYLE | CHAMFERED |
| MATERIAL | STEEL COMP 440C OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.460 INCHES NOMINAL IN |
| FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL IN |
| PIN OVERALL LENGTH | 0.600 INCHES NOMINAL IN |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.055 INCHES NOMINAL IN |