PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 483649-3
483649-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.156 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-727-0820, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
483649-3
NSN: 5340-00-727-0820
FSC: 5340
CAGE: 54X10 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
diameter0.156 INCHES NOMINAL IN
materialPLASTIC BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.312 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.686 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.498 INCHES NOMINAL IN
NSN5340-00-727-0820
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 483649-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.686 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC BAND
•
LOOP INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.498 INCHES NOMINAL IN
•
DIAMETER: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END0.686 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC BAND
LOOP INSIDE DIAMETER0.312 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.498 INCHES NOMINAL IN
DIAMETER0.156 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
AP-2Upgraded Successor
successor cross-reference
successor
702-192-233-2Upgraded Successor
successor cross-reference
successor
ADJ-P-CLIP-SIZEUpgraded Successor
successor cross-reference
successor
PH-23801-6Interchangeable
interchangeable cross-reference
interchangeable
NX3Interchangeable
interchangeable cross-reference
interchangeable
BPV21Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 483649-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 483649-3?
483649-3 is a CLAMP,LOOP.
What parts can replace 483649-3?
There are 15 known substitutes for 483649-3: AP-2, 702-192-233-2, ADJ-P-CLIP-SIZE and 12 more. Substitute compatibility should be verified for your specific system.
Is 483649-3 still available?
483649-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 483649-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026