PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 483237
483237 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.313 INCHES NOMINAL IN, housing_bore_diameter: 2.378 INCHES NOMINAL IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 1.745 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-447-7716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
483237
NSN: 5330-00-447-7716
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.313 INCHES NOMINAL IN
housing_bore_diameter2.378 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.745 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
NSN5330-00-447-7716
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 483237 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: VERTICAL
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.378 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.745 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SEALING ELEMENT STYLEVERTICAL
SEAL WIDTH0.313 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.378 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.745 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
588A79Interchangeable
interchangeable cross-reference
interchangeable
SP750531Interchangeable
interchangeable cross-reference
interchangeable
16610-1Interchangeable
interchangeable cross-reference
interchangeable
34430Interchangeable
interchangeable cross-reference
interchangeable
8895K1Interchangeable
interchangeable cross-reference
interchangeable
1173-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 483237?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 483237?
483237 is a SEAL,PLAIN ENCASED.
What parts can replace 483237?
There are 10 known substitutes for 483237: 588A79, SP750531, 16610-1 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 483237?
483237 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-447-7716. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 483237

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026