PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 48315
48315 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BIT,SCREWDRIVER is a Lindy industrial component. Key specifications include material: STEEL OVERALL, shank_style: HEXAGON, twist_length: 21.000 INCHES NOMINAL IN, overall_length: 24.000 INCHES NOMINAL IN, special_features: SINGLE SPUR; UTILITY POLE TYPE; FOR USE WITH IMPACT WRENCH; 5/8 IN. QUICK CHANGE HEX SHANK IN, cutting_end_style: HOLLOW CENTER SINGLE TWIST W/SCREW POINT.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-037-6940, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
48315
NSN: 5330-00-037-6940
FSC: 5330
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_styleHEXAGON
twist_length21.000 INCHES NOMINAL IN
overall_length24.000 INCHES NOMINAL IN
special_featuresSINGLE SPUR; UTILITY POLE TYPE; FOR USE WITH IMPACT WRENCH; 5/8 IN. QUICK CHANGE HEX SHANK IN
cutting_end_styleHOLLOW CENTER SINGLE TWIST W/SCREW POINT
width_across_flats0.625 INCHES NOMINAL IN
nominal_cutting_diameter0.9375 INCHES IN
NSN5330-00-037-6940
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 48315 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: D
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
PERIPHERAL DIAMETER: 2.625 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.406 INCHES NOMINAL IN
•
FSC APPLICATION DATA: ENGINE,AIRCRAFT,RECIPROCATING
•
CENTER HOLE DIAMETER: 2.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLED
MATERIALRUBBER SYNTHETIC OVERALL
PERIPHERAL DIAMETER2.625 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL HEIGHT0.406 INCHES NOMINAL IN
FSC APPLICATION DATAENGINE,AIRCRAFT,RECIPROCATING
CENTER HOLE DIAMETER2.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
9962Interchangeable
interchangeable cross-reference
interchangeable
TMT-99-62Interchangeable
interchangeable cross-reference
interchangeable
41H24 15/16 (5/8 IN. HEX)Interchangeable
interchangeable cross-reference
interchangeable
48315Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 48315?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48315?
48315 is a BIT,SCREWDRIVER manufactured by Lindy.
What parts can replace 48315?
There are 4 known substitutes for 48315: 9962, TMT-99-62, 41H24 15/16 (5/8 IN. HEX) and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 48315?
48315 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-037-6940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48315

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026