PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 482AND472X
482AND472X ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.9687 INCHES NOMINAL IN, cone_width: 1.1420 INCHES NOMINAL IN, bore_diameter: 2.7500 INCHES NOMINAL IN, overall_width: 1.1875 INCHES NOMINAL IN, standout_width: 0.2188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-4173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
482AND472X
NSN: 3110-00-100-4173
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.9687 INCHES NOMINAL IN
cone_width1.1420 INCHES NOMINAL IN
bore_diameter2.7500 INCHES NOMINAL IN
overall_width1.1875 INCHES NOMINAL IN
standout_width0.2188 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter4.8750 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-4173
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 482AND472X · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CUP WIDTH: 0.9687 INCHES NOMINAL IN
•
CONE WIDTH: 1.1420 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 4.8750 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.2188 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CUP WIDTH0.9687 INCHES NOMINAL IN
CONE WIDTH1.1420 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER4.8750 INCHES NOMINAL IN
OVERALL WIDTH1.1875 INCHES NOMINAL IN
STANDOUT WIDTH0.2188 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
BORE DIAMETER2.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
12314Interchangeable
interchangeable cross-reference
interchangeable
11442Interchangeable
interchangeable cross-reference
interchangeable
R10Interchangeable
interchangeable cross-reference
interchangeable
150 7/32Interchangeable
interchangeable cross-reference
interchangeable
106AInterchangeable
interchangeable cross-reference
interchangeable
1AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 482AND472X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 482AND472X?
482AND472X is a BEARING,ROLLER,TAPERED.
What parts can replace 482AND472X?
There are 13 known substitutes for 482AND472X: 12314, 11442, R10 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 482AND472X?
482AND472X is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-4173. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 482AND472X

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026