PartsTable
Technical Data Sheet
Download PDF

4829352-6 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4829352-6: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1213 OVERALL, nut_style: SLEEVE, nut_length: 2.500 INCHES NOMINAL IN, nut_diameter: 0.684 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN, thread_class: 2B, boss_diameter: 0.256 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-130-0608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4829352-6
NSN: 5310-01-130-0608
FSC: 5310 — Nuts and Washers
CAGE: 0AHU0 — KALMAR AC INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1213 OVERALL
nut_styleSLEEVE
nut_length2.500 INCHES NOMINAL IN
nut_diameter0.684 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
thread_class2B
boss_diameter0.256 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
thread_length1.920 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
thread_seriesUNF
boss_thickness0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
special_featuresDRY FILM LUBRICANT
thread_directionLEFT-HAND
nominal_thread_size0.500 INCHES IN
NSN5310-01-130-0608
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4829352-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 2.500 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD LENGTH: 1.920 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: LEFT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT DIAMETER: 0.684 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
•
BOSS THICKNESS: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
NUT LENGTH2.500 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD LENGTH1.920 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONLEFT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT DIAMETER0.684 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
BOSS THICKNESS0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPEROUND NUT
BOSS DIAMETER0.256 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
197538Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
317805Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4829352-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4829352-6?
4829352-6 is a NUT,SLEEVE.
What parts can replace 4829352-6?
There are 2 known substitutes for 4829352-6: 197538, 317805. Substitute compatibility should be verified for your specific system.
What is the NSN for 4829352-6?
4829352-6 is cataloged in the U.S. Government catalog under NSN 5310-01-130-0608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4829352-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.