48206: RING,PISTON.
Cat.6 U/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.
A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the skin effect , while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad This part is cataloged in the U.S.
Government catalog under NSN 5310-00-292-3406, indicating validated use in U.S. government and defense logistics supply chains.
| material | STEEL CORROSION RESISTING OVERALL |
| end_style | SPRING END,SQUARED SECOND END |
| bore_diameter | 1.290 INCHES NOMINAL IN |
| coil_quantity | 9.5 |
| inside_diameter | 0.953 INCHES NOMINAL IN |
| style_designator | CYLINDRICAL |
| spring_free_length | 2.531 INCHES NOMINAL IN |
| spring_solid_length | 1.480 INCHES NOMINAL IN |
| coil_helix_direction | RIGHT-HAND |
| spring_deflection_rate | 58.000 POUNDS PER INCH NOMINAL LBS |
| accommodated_rod_diameter | 0.921 INCHES NOMINAL IN |
| spring_free_outside_diameter | 1.250 INCHES NOMINAL IN |
| NSN | 5310-00-292-3406 |
| OVERALL DIAMETER | 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| PERIPHERAL SHAPE STYLE | ROUND |
| MATERIAL | CELLULOSE OVERALL |
| CENTER HOLE SHAPE STYLE | ROUND |
| HOLE DIAMETER | 0.515 INCHES MINIMUM AND 0.522 INCHES MAXIMUM IN |
| THICKNESS | 0.064 INCHES NOMINAL IN |
No substitute or cross-reference records for this part.