PartsTable
Technical Data Sheet
PartsTable / MRO / 482007
482007 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,CERAMIC DIELE. Key specifications include material: STEEL COMP 304 OVERALL, cup_width: 0.5605 INCHES NOMINAL IN, body_style: ROTARY, body_width: 0.938 INCHES NOMINAL IN, cone_width: 0.8125 INCHES NOMINAL IN, head_style: HEADLESS (SETSCREW). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-5283, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 482007
NSN: 3110-00-100-5283
FSC: 3110
CAGE: 08219 — STONE SAFETY CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
cup_width0.5605 INCHES NOMINAL IN
body_styleROTARY
body_width0.938 INCHES NOMINAL IN
cone_width0.8125 INCHES NOMINAL IN
head_styleHEADLESS (SETSCREW)
body_height1.250 INCHES NOMINAL IN
body_length0.812 INCHES NOMINAL IN
thread_class2B
bore_diameter1.4375 INCHES NOMINAL IN
overall_width0.7480 INCHES NOMINAL IN
inclosure_typeENCAPSULATED
NSN3110-00-100-5283
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 482007 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
CUP WIDTH: 0.5605 INCHES NOMINAL IN
•
BORE DIAMETER: 1.4375 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 0.8125 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
CUP WIDTH0.5605 INCHES NOMINAL IN
BORE DIAMETER1.4375 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OVERALL WIDTH0.7480 INCHES NOMINAL IN
CONE WIDTH0.8125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
NONDEFINITIVE SPEC/STD DATA751 TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
8108036Interchangeable
interchangeable cross-reference
interchangeable
281-0028-00Interchangeable
interchangeable cross-reference
interchangeable
482007Interchangeable
interchangeable cross-reference
interchangeable
12993489Interchangeable
interchangeable cross-reference
interchangeable
16143-16282Interchangeable
Same NIIN cross-reference
interchangeable
612040-1ITEM5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 482007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 482007?
482007 is a CAPACITOR,VARIABLE,CERAMIC DIELE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 482007?
There are 8 known substitutes for 482007: 8108036, 281-0028-00, 482007 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 482007?
482007 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-5283. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 482007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026