The Valve,flow Control, cataloged under National Stock Number 4820-01-514-6094, is classified within Federal Supply Class 4820 (Valves, Nonpowered) of the Valves group. The manufacturer of record is Sun Hydraulics Corporation. Government technical data includes 4 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4820-01-514-6094 |
| Primary Part Number | CBEG CCN |
| Item Name | Valve,flow Control |
| FSC / FSG | 4820 / 48 — Valves, Nonpowered |
| Manufacturer | Sun Hydraulics Corporation |
| Status | ACTIVE |
| Flow Control Device | SLIDE |
| Maximum Operating Temp and Media for Which Designed | 200.0 FAHRENHEIT HYDRAULIC FLUID, PETROLEUM BASE DEGF |
| Operating Pressure and Type | 5000.0 POUNDS PER SQUARE INCH (PSI) HYDRAULIC FLUID, PETROLEUM BASE MAXIMUM REQUIRED LBS |
| Valve Operation Method | AUTOMATIC |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| CBEG CCN | Sun Hydraulics Corporation (USA) |
| Reference | Meaning |
|---|---|
| 623-5411-002 | 3/9 Design control — primary reference U.S. Government activity |
NSN 4820-01-514-6094 is a Valve,flow Control, manufactured by Sun Hydraulics Corporation, classified under FSC 4820, Valves, Nonpowered. Status: active.
NSN 4820-01-514-6094 has 1 manufacturer part number on file: CBEG CCN (Sun Hydraulics Corporation).
Key specifications for CBEG CCN: Flow Control Device: SLIDE; Maximum Operating Temp and Media for Which Designed: 200.0 FAHRENHEIT HYDRAULIC FLUID, PETROLEUM BASE DEGF; Operating Pressure and Type: 5000.0 POUNDS PER SQUARE INCH (PSI) HYDRAULIC FLUID, PETROLEUM BASE MAXIMUM REQUIRED LBS; Special Features: TAMPER RESISTANT - FACTORY SET @4000 PSI; NOMINAL CAPACITY 30 GPM, PILOT RATIO 4.5:1; 4 PSI REVERSE FLOW CHECK; CARTRIDGE INSTALLATION TORQUE 40 TO 50 FT-LB; BUNA N SEALS TO PERMIT OPERATING TEMPERATURE OF -50 TO +200 DEG FEH; LENGTH 3.76 INCHS FROM NUT BOLT TO INLET FACE FT. 4 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.