PartsTable
Technical Data Sheet
Download PDF

48176 — PISTON,COMPRESSOR

✓ Government record, cited
Legrand · BOLT SCREW
PRODUCT OVERVIEW

48176: PISTON,COMPRESSOR.

Cat.6 U/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.

A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the skin effect , while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad This part is cataloged in the U.S.

Government catalog under NSN 5325-00-282-6328, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
48176
NSN: 5325-00-282-6328
NIINs: 002826328, 013041467
FSC: 5325 — Fastening Devices
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
end_item_identification4310-01-162-5740
NSN5325-00-282-6328
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 48176 · Legrand ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
USAGE DESIGN: INTERNAL
•
END STYLE: D SHAP BELOW INSIDE PERIPHERY
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5112 ASSN STD SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: ROUNDED CORNERS
•
OUTSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
MAJOR THICKNESS: 0.063 INCHES NOMINAL IN
•
INSIDE DIAMETER: 2.374 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
TECHNICAL CHARACTERISTICS
USAGE DESIGNINTERNAL
END STYLED SHAP BELOW INSIDE PERIPHERY
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5112 ASSN STD SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEROUNDED CORNERS
OUTSIDE DIAMETER2.500 INCHES NOMINAL IN
MAJOR THICKNESS0.063 INCHES NOMINAL IN
INSIDE DIAMETER2.374 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
RING STYLESTRAIGHT GAP
MATERIALSTEEL COMP 1090
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 48176?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48176?
48176 is a PISTON,COMPRESSOR manufactured by Legrand.
What is the NSN for 48176?
48176 is cataloged in the U.S. Government catalog under NSN 5325-00-282-6328. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48176