48175: CONNECTOR,PLUG,ELECTRICAL.
Cat.6 U/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.
A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the skin effect , while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad This part is cataloged in the U.S.
Government catalog under NSN 5340-00-270-8535, indicating validated use in U.S. government and defense logistics supply chains.
| material | STEEL |
| end_style | SPRING END,SQUARED AND GROUND BOTH ENDS |
| head_height | 0.219 INCHES NOMINAL IN |
| coil_quantity | 7-63/100 |
| overall_height | 0.500 INCHES NOMINAL IN |
| prong_quantity | 14 |
| inside_diameter | 1.078 INCHES NOMINAL IN |
| style_designator | CYLINDRICAL |
| surface_treatment | PASSIVATE OVERALL |
| spring_free_length | 4.406 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN |
| coil_helix_direction | RIGHT-HAND OR LEFT-HAND |
| head_outside_diameter | 2.312 INCHES NOMINAL IN |
| NSN | 5340-00-270-8535 |
| OVERALL HEIGHT | 0.531 INCHES NOMINAL IN |
| HEAD HEIGHT | 0.156 INCHES NOMINAL IN |
| HOLE ACCOMMODATION DIAMETER | 2.000 INCHES NOMINAL IN |
| MATERIAL ACCOMMODATED THICKNESS | 0.037 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | STANDARD |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE |
| PRONG OUTSIDE DIAMETER | 2.031 INCHES NOMINAL IN |
| SURFACE TREATMENT | CADMIUM OR ZINC |
| HEAD OUTSIDE DIAMETER | 2.312 INCHES NOMINAL IN |
| MATERIAL | STEEL COMP 1010 |