Cat.6 U/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br>Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO/IEC 11801 specification.
The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the skin effect , while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5950-00-070-8246, indicating validated use in U.S.
government and defense logistics supply chains.
| material | WOOL OVERALL |
| thickness | 0.062 INCHES NOMINAL IN |
| body_width | 3.750 INCHES NOMINAL IN |
| body_height | 5.750 INCHES NOMINAL IN |
| body_length | 9.250 INCHES NOMINAL IN |
| head_height | 0.078 INCHES NOMINAL IN |
| hole_diameter | 0.125 INCHES NOMINAL IN |
| inclosure_type | HERMETICALLY SEALED |
| overall_height | 0.281 INCHES NOMINAL IN |
| prong_quantity | 8 |
| mounting_method | THREADED HOLE(S) SINGLE GROUP |
| frequency_rating | 55.0 HERTZ MINIMUM AND 65.0 HERTZ MAXIMUM SINGLE COMPONENT |
| NSN | 5950-00-070-8246 |
| MOUNTING METHOD | THREADED HOLE(S) SINGLE GROUP |
| WINDING OPERATING CURRENT | 250.0 MILLIAMPERES AC MAXIMUM SINGLE COMPONENT FIRST SECONDARY |
| TERMINAL TYPE AND QUANTITY | 9 TAB, SOLDER LUG |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| BODY HEIGHT | 5.750 INCHES NOMINAL IN |
| THREAD QUANTITY PER INCH | 20 SINGLE GROUP |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) SINGLE GROUP |
| WINDING OPERATING VOLTAGE | 15.00 AC VOLTS NOMINAL SINGLE COMPONENT FIRST SECONDARY |