48164: PORT ADAPTER,GPS RECEIVER.
Cat.6 U/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.
A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the skin effect , while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad This part is cataloged in the U.S.
Government catalog under NSN 5310-00-596-9747, indicating validated use in U.S. government and defense logistics supply chains.
| material | STEEL COMP 8740 OVERALL |
| thickness | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| hole_diameter | 0.250 INCHES NOMINAL IN |
| overall_length | 8.200 INCHES NOMINAL IN |
| overall_diameter | 0.541 INCHES MINIMUM AND 0.548 INCHES MAXIMUM IN |
| peripheral_shape_style | ROUND |
| center_hole_shape_style | ROUND |
| end_item_identification | 5895-01-593-8131, RECEIVER, GPS |
| cross-sectional_shape_style | RECTANGULAR |
| material_document_and_classification | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| NSN | 5310-00-596-9747 |
| OVERALL DIAMETER | 0.541 INCHES MINIMUM AND 0.548 INCHES MAXIMUM IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| PERIPHERAL SHAPE STYLE | ROUND |
| MATERIAL | STEEL COMP 8740 OVERALL |
| CENTER HOLE SHAPE STYLE | ROUND |
| HOLE DIAMETER | 0.250 INCHES NOMINAL IN |
| THICKNESS | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.