PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 481504
481504 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SUPPORT,REGULATOR is a the manufacturer industrial component. Key specifications include fsc_application_data: MISCELLANEOUS ENGINE ACCESSORIES,AIRCRAFT, functional_description: USED FOR ANTI-ICING REGULATOR, end_item_identification: U/O TF33-PW-102 ENG,E/I KC135 ACFT, general_characteristics_item_description: HARDNESS RC35-40,3.060 IN. OD,0.679 IN.

ID IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-861-7810, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
481504
NSN: 5330-00-861-7810
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
fsc_application_dataMISCELLANEOUS ENGINE ACCESSORIES,AIRCRAFT
functional_descriptionUSED FOR ANTI-ICING REGULATOR
end_item_identificationU/O TF33-PW-102 ENG,E/I KC135 ACFT
general_characteristics_item_descriptionHARDNESS RC35-40,3.060 IN. OD,0.679 IN. ID IN
NSN5330-00-861-7810
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 481504 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 2.440 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.440 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.312 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
OUTSIDE DIAMETER2.445 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
4610015055Interchangeable
interchangeable cross-reference
interchangeable
UG1098UInterchangeable
interchangeable cross-reference
interchangeable
SCDL72272Interchangeable
interchangeable cross-reference
interchangeable
17315Interchangeable
interchangeable cross-reference
interchangeable
8380724Interchangeable
interchangeable cross-reference
interchangeable
A-17101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 481504?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 481504?
481504 is a SUPPORT,REGULATOR.
What parts can replace 481504?
There are 13 known substitutes for 481504: 4610015055, UG1098U, SCDL72272 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 481504?
481504 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-861-7810. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 481504

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026