PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 48141
48141 ✓ Verified by PartsTable
Lindy · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The VALVE ASSEMBLY,COMPRESSOR is a Lindy industrial component. Key specifications include general_characteristics_item_description: USED ON LOW PRESSURE DISCHARGE VALVE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-526-1934, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
48141
NSN: 5310-00-526-1934
FSC: 5310
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
general_characteristics_item_descriptionUSED ON LOW PRESSURE DISCHARGE VALVE
NSN5310-00-526-1934
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 48141 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
NUT DIAMETER: 0.715 INCHES MINIMUM AND 0.725 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE: HEXAGONAL FLANGE
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
FLANGE WIDTH ACROSS FLATS: 0.750 INCHES NOMINAL IN
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE THICKNESS0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
NUT DIAMETER0.715 INCHES MINIMUM AND 0.725 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
FLANGE WIDTH ACROSS FLATS0.750 INCHES NOMINAL IN
THREAD CLASS2B
SPECIAL FEATURES5/64 IN. SHOULDER UNDER HEAD,1/16 IN. RADIUS ON SHANK,0.010 IN. BY 45 DEG CHAMFER ON SHANK END IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NUT LENGTH0.422 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
S382CInterchangeable
interchangeable cross-reference
interchangeable
HPS382CInterchangeable
interchangeable cross-reference
interchangeable
500078Interchangeable
interchangeable cross-reference
interchangeable
48141Interchangeable
interchangeable cross-reference
interchangeable
LL-H58-4211Interchangeable
interchangeable cross-reference
interchangeable
500078-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 48141?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48141?
48141 is a VALVE ASSEMBLY,COMPRESSOR manufactured by Lindy.
What parts can replace 48141?
There are 10 known substitutes for 48141: S382C, HPS382C, 500078 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 48141?
48141 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-526-1934. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48141

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026