PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 48135BJ
48135BJ ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR SEALING ELEMENT, case_style: SQUARE, seal_width: 0.440 INCHES NOMINAL IN, housing_bore_diameter: 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 1.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2850, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
48135BJ
NSN: 5330-00-641-2850
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR SEALING ELEMENT
case_styleSQUARE
seal_width0.440 INCHES NOMINAL IN
housing_bore_diameter1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.060 INCHES NOMINAL IN
NSN5330-00-641-2850
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 48135BJ MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
MATERIAL: LEATHER SEALING ELEMENT
•
SURFACE TREATMENT: PLASTIC CASE
•
HOUSING BORE DIAMETER: 2.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
OUTSIDE DIAMETER: 2.004 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
MATERIALLEATHER SEALING ELEMENT
SURFACE TREATMENTPLASTIC CASE
HOUSING BORE DIAMETER2.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
OUTSIDE DIAMETER2.004 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.438 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.062 INCHES NOMINAL IN
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
50158Interchangeable
interchangeable cross-reference
interchangeable
DS100772-1Interchangeable
interchangeable cross-reference
interchangeable
60331Interchangeable
interchangeable cross-reference
interchangeable
2961634Interchangeable
interchangeable cross-reference
interchangeable
695619-5Interchangeable
interchangeable cross-reference
interchangeable
60-331AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 48135BJ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48135BJ?
48135BJ is a SEAL,PLAIN ENCASED.
What parts can replace 48135BJ?
There are 30 known substitutes for 48135BJ: 50158, DS100772-1, 60331 and 27 more. Substitute compatibility should be verified for your specific system.
Is 48135BJ still available?
48135BJ is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48135BJ

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026