PartsTable
Technical Data Sheet
Download PDF

48135AG — SEAL,OIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

48135AG: SEAL,OIL.

The SEAL,OIL is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL, outside_diameter: 2.004 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-154-0903, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
48135AG
NSN: 5330-00-154-0903
NIINs: 001540903, 010808432
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter2.004 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.000 INCHES NOMINAL IN
sealing_element_styleANGULAR
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter1.188 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-0903
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 48135AG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 2.004 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
HOUSING BORE DIAMETER: 2.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
SEAL WIDTH0.438 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER2.004 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
HOUSING BORE DIAMETER2.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
COLORBLACK
SUBSTITUTES & CROSS-REFERENCES 9
13-463-4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
221551Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
509A40Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4501458-6Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4501458Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
34631Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 48135AG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48135AG?
48135AG is a SEAL,OIL.
What parts can replace 48135AG?
There are 9 known substitutes for 48135AG: 13-463-4, 221551, 509A40 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 48135AG?
48135AG is cataloged in the U.S. Government catalog under NSN 5330-00-154-0903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48135AG

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.