PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 481316
481316 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, overall_width: 4.090 INCHES NOMINAL IN, aperture_width: 3.340 INCHES NOMINAL IN, overall_length: 5.710 INCHES NOMINAL IN, aperture_length: 4.960 INCHES NOMINAL IN, style_designator: NON-CIRCULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-733-2992, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
481316
NSN: 5330-00-733-2992
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
overall_width4.090 INCHES NOMINAL IN
aperture_width3.340 INCHES NOMINAL IN
overall_length5.710 INCHES NOMINAL IN
aperture_length4.960 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity8
inside_corner_radius0.310 INCHES NOMINAL IN
outside_corner_radius0.690 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.170 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.170 INCHES NOMINAL IN
NSN5330-00-733-2992
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 481316 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: RECESSED
•
SEALING ELEMENT STYLE: VERTICAL
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.685 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 1.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLERECESSED
SEALING ELEMENT STYLEVERTICAL
SEAL WIDTH0.375 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.685 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER1.562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
8104777Interchangeable
interchangeable cross-reference
interchangeable
107198Interchangeable
interchangeable cross-reference
interchangeable
12TInterchangeable
interchangeable cross-reference
interchangeable
610Interchangeable
interchangeable cross-reference
interchangeable
26412Interchangeable
interchangeable cross-reference
interchangeable
553340Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 481316?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 481316?
481316 is a GASKET.
What parts can replace 481316?
There are 12 known substitutes for 481316: 8104777, 107198, 12T and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 481316?
481316 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-733-2992. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 481316

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026