4812-6 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

Lindy · MRO · MRO_GENERAL

PRODUCT OVERVIEW

4812-6: RESISTOR,VARIABLE,WIRE WOUND,NON.

Cat.6 U/UTP PVC network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.

A robust snagless strain relief design prevents damage to the connector latch during installation and removal. Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m. Available colours: Blue, Red, Green, Yellow, Black, White, Orange, Purple, Grey.

This part is cataloged in the U.S. Government catalog under NSN 5905-00-098-8181, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS

MRO→ MRO_GENERAL→ 4812-6

NSN: 5905-00-098-8181
NIINs: 000988181, 010852710, 011993677, 012401588, 012952083, 016745473
FSC: 5905 — Resistor
CAGE: 52542 — SYSTRON-DONNER CORP MICROWAVE/INSTRUMENT DIV (USA)

SPECIFICATIONS

material	IRON CAST BODY
body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.469 INCHES NOMINAL IN
bore_length	1.500 INCHES MINIMUM AND 1.501 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	0.500 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
body_diameter	0.938 INCHES NOMINAL IN
bore_diameter	3.000 INCHES MINIMUM AND 3.001 INCHES MAXIMUM IN
overall_width	5.750 INCHES NOMINAL IN
cooling_method	AIR TO AIR COOLED
overall_height	4.550 INCHES MINIMUM AND 4.553 INCHES MAXIMUM IN
NSN	5905-00-098-8181

COMPONENT DIAGRAM

KEY FEATURES

•

NONTURN DEVICE LOCATION: AT 9 OCLOCK

•

BODY DIAMETER: 0.938 INCHES NOMINAL IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 1.5 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 105.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL IN

•

NONTURN DEVICE RADIUS: 0.438 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

NONTURN DEVICE LOCATION	AT 9 OCLOCK
BODY DIAMETER	0.938 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	1.5 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS	0.438 INCHES NOMINAL IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
MOUNTING METHOD	LOCKING BUSHING

SUBSTITUTES & CROSS-REFERENCES 2

600195Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LTAW1-5KReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 4812-6?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 4812-6?

4812-6 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).

What parts can replace 4812-6?

There are 2 known substitutes for 4812-6: 600195, LTAW1-5K. Substitute compatibility should be verified for your specific system.

What is the NSN for 4812-6?

4812-6 is cataloged in the U.S. Government catalog under NSN 5905-00-098-8181. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

4812-6 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 4812-6