PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 481192H
481192H ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, outside_diameter: 2.129 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-492-1774, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
481192H
NSN: 5330-00-492-1774
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
outside_diameter2.129 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.129 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3725 FEET PER MINUTE FT
NSN5330-00-492-1774
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 481192H MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.129 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
•
CASE STYLE: RECESSED
•
SEALING ELEMENT STYLE: VERTICAL
•
OUTSIDE DIAMETER: 2.129 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.129 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
SEAL WIDTH0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
CASE STYLERECESSED
SEALING ELEMENT STYLEVERTICAL
OUTSIDE DIAMETER2.129 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SURFACE TREATMENTPLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
V13663Interchangeable
interchangeable cross-reference
interchangeable
13663Interchangeable
interchangeable cross-reference
interchangeable
600-12CFInterchangeable
interchangeable cross-reference
interchangeable
600-12GMEInterchangeable
interchangeable cross-reference
interchangeable
A504570-12Interchangeable
interchangeable cross-reference
interchangeable
13663-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 481192H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 481192H?
481192H is a SEAL,PLAIN ENCASED.
What parts can replace 481192H?
There are 8 known substitutes for 481192H: V13663, 13663, 600-12CF and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 481192H?
481192H is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-492-1774. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 481192H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026