PartsTable
Technical Data Sheet
Download PDF

4810-770717PC20 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4810-770717PC20: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: LEATHER OVERALL, peripheral_diameter: 1.938 INCHES NOMINAL IN, center_hole_diameter: 0.938 INCHES NOMINAL IN, cross-sectional_height: 0.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-256-0230, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4810-770717PC20
NSN: 5330-00-256-0230
FSC: 5330 — Packing and Gasket Materials
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialLEATHER OVERALL
peripheral_diameter1.938 INCHES NOMINAL IN
center_hole_diameter0.938 INCHES NOMINAL IN
cross-sectional_height0.500 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5330-00-256-0230
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4810-770717PC20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: U
•
PERIPHERAL DIAMETER: 1.938 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.938 INCHES NOMINAL IN
•
MATERIAL: LEATHER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEU
PERIPHERAL DIAMETER1.938 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.938 INCHES NOMINAL IN
MATERIALLEATHER OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
69061PCD3Reference document
Same NSN cross-reference
Reference document — Secondary reference
8974PC2Reference document
Same NSN cross-reference
Reference document — Secondary reference
240-2100-1036028REVAPC20Reference document
Same NSN cross-reference
Reference document — Secondary reference
2123-482PCU3Reference document
Same NSN cross-reference
Reference document — Secondary reference
417-2100-70755ALT16PCU3Reference document
Same NSN cross-reference
Reference document — Secondary reference
475-2100-720729ALT1PC48Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 4810-770717PC20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4810-770717PC20?
4810-770717PC20 is a PACKING,PREFORMED.
What parts can replace 4810-770717PC20?
There are 9 known substitutes for 4810-770717PC20: 69061PCD3, 8974PC2, 240-2100-1036028REVAPC20 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4810-770717PC20?
4810-770717PC20 is cataloged in the U.S. Government catalog under NSN 5330-00-256-0230. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4810-770717PC20