PartsTable
Technical Data Sheet
Download PDF

480619 — BEARING,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

480619: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 630 OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 1.9800 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM IN, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 3.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-106-9417, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
480619
NSN: 5340-01-106-9417
NIINs: 011069417, 011726634
FSC: 5340 — Hardware, Commercial
CAGE: 41843 — HOBART BROTHERS LLC (USA)
SPECIFICATIONS
materialCOPPER ALLOY 630 OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length1.9800 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM IN
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width3.000 INCHES NOMINAL IN
first_leg_length2.000 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width3.000 INCHES NOMINAL IN
special_featuresID EXCEPT GROOVE F-4.10 PLATE,BOEING SPEC
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
second_leg_length5.687 INCHES NOMINAL IN
NSN5340-01-106-9417
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 480619 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 903318 RED,FSCM 41843 MFR REF SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 3.000 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 5.687 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
•
FIRST LEG LENGTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION903318 RED,FSCM 41843 MFR REF SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH3.000 INCHES NOMINAL IN
SECOND LEG LENGTH5.687 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
FIRST LEG LENGTH2.000 INCHES NOMINAL IN
FIRST LEG WIDTH3.000 INCHES NOMINAL IN
SECOND LEG STYLESQUARE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 480619?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 480619?
480619 is a BEARING,SLEEVE.
What is the NSN for 480619?
480619 is cataloged in the U.S. Government catalog under NSN 5340-01-106-9417. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 480619

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.