PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 480496R
480496R ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, housing_bore_diameter: 1.127 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.438 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-6203, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
480496R
NSN: 5330-00-599-6203
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
housing_bore_diameter1.127 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.438 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-599-6203
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 480496R MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 1.127 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 0.438 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER1.127 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER0.438 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
SEAL WIDTH0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
103957-1Interchangeable
interchangeable cross-reference
interchangeable
50-003Interchangeable
interchangeable cross-reference
interchangeable
EUDERMIC SURGICAL GLOVESInterchangeable
Gloves,surgeons'
interchangeable
8575Interchangeable
Gloves,surgeons'
interchangeable
37-6189-1Interchangeable
Gloves,surgeons'
interchangeable
4860-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 480496R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 480496R?
480496R is a SEAL,PLAIN ENCASED.
What parts can replace 480496R?
There are 19 known substitutes for 480496R: 103957-1, 50-003, EUDERMIC SURGICAL GLOVES and 16 more. Substitute compatibility should be verified for your specific system.
Is 480496R still available?
480496R is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 480496R

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026