PartsTable
Technical Data Sheet
48036 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Cat.6 U/UTP PVC network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br>Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO/IEC 11801 specification.

The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.<br>Available colours: Blue, Red, Green, Yellow, Black, White, Orange, Purple, Grey. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6828, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
48036
NSN: 5330-00-286-6828
FSC: 5330
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
case_styleSQUARE
seal_width0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
overall_length67.0 MILLIMETERS MAXIMUM MM
drive_end_shapeSQUARE SINGLE END INTERNAL
inside_diameter0.875 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
style_designatorWIRE
features_providedPOWER TOOL
surface_treatmentOXIDE OVERALL
drive_surface_size0.750 INCHES NOMINAL SINGLE END IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
housing_bore_diameter1.623 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
NSN5330-00-286-6828
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 48036 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLE: SQUARE
SEAL WIDTH: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER: 0.938 INCHES NOMINAL IN
HOUSING BORE DIAMETER: 1.623 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
SEAL WIDTH0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER0.938 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.623 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
502-17Interchangeable
interchangeable cross-reference
interchangeable
502-0017Interchangeable
interchangeable cross-reference
interchangeable
16-230Interchangeable
interchangeable cross-reference
interchangeable
3-8 5SN250LBInterchangeable
interchangeable cross-reference
interchangeable
5201S4803-2801PC4Interchangeable
interchangeable cross-reference
interchangeable
BT-80023Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 48036?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48036?
48036 is a PUSH ROD,ENGINE POPPET VALVE manufactured by Lindy.
What parts can replace 48036?
There are 18 known substitutes for 48036: 502-17, 502-0017, 16-230 and 15 more. Substitute compatibility should be verified for your specific system.
Is 48036 still available?
48036 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48036