PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4801-12
4801-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TERMINAL BOARD is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, body_style: TAPER PIN, peripheral_diameter: 4.320 INCHES NOMINAL IN, center_hole_diameter: 2.450 INCHES NOMINAL IN, cross-sectional_height: 0.850 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-050-9673, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4801-12
NSN: 5330-01-050-9673
FSC: 5330
CAGE: 29780 — MAG AEROSPACE INDUSTRIES, LLC DIV SAFRAN CABINS (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
body_styleTAPER PIN
peripheral_diameter4.320 INCHES NOMINAL IN
center_hole_diameter2.450 INCHES NOMINAL IN
cross-sectional_height0.850 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
material_document_and_classificationAMS 3197 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-050-9673
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4801-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3197 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CENTER HOLE DIAMETER: 2.450 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.850 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 4.320 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESPECIAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3197 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE DIAMETER2.450 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.850 INCHES NOMINAL IN
PERIPHERAL DIAMETER4.320 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
23646Interchangeable
interchangeable cross-reference
interchangeable
480112Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4801-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4801-12?
4801-12 is a TERMINAL BOARD.
What parts can replace 4801-12?
There are 2 known substitutes for 4801-12: 23646, 480112. Substitute compatibility should be verified for your specific system.
What is the NSN for 4801-12?
4801-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-050-9673. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4801-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026