PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 480085
480085 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include end_item_identification: HIGH PRESSURE CLEANER, part_name_assigned_by_controlling_agency: BEARING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
480085
NSN: 5330-00-285-8387
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
end_item_identificationHIGH PRESSURE CLEANER
part_name_assigned_by_controlling_agencyBEARING
NSN5330-00-285-8387
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 480085 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 2.996 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER2.996 INCHES NOMINAL IN
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
559-552AInterchangeable
interchangeable cross-reference
interchangeable
223288Interchangeable
interchangeable cross-reference
interchangeable
19269HInterchangeable
interchangeable cross-reference
interchangeable
40734Interchangeable
interchangeable cross-reference
interchangeable
40408Interchangeable
interchangeable cross-reference
interchangeable
RT8100-126Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 480085?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 480085?
480085 is a BEARING,SLEEVE.
What parts can replace 480085?
There are 26 known substitutes for 480085: 559-552A, 223288, 19269H and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 480085?
480085 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8387. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 480085

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026