PartsTable
Technical Data Sheet
Download PDF

480041 — TRANSISTOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

480041: TRANSISTOR.

The TRANSISTOR is a the manufacturer industrial component. Key specifications include material: PLASTIC ENCLOSURE, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, overall_height: 0.155 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN, overall_length: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5330-00-298-0389, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
480041
NSN: 5330-00-298-0389
NIINs: 002980389, 010892199
FSC: 5330 — Packing and Gasket Materials
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialPLASTIC ENCLOSURE
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
overall_height0.155 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
overall_length0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
special_featuresJUNCTION PATTERN ARRANGEMENT: NPN
housing_bore_diameter1.832 INCHES NOMINAL IN
sealing_element_styleANGULAR
internal_configurationJUNCTION CONTACT
semiconductor_materialSILICON
mounting_facility_quantity1
NSN5330-00-298-0389
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 480041 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.832 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.438 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.832 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 2
5156309Reference document
Same NSN cross-reference
Reference document — Secondary reference
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 480041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 480041?
480041 is a TRANSISTOR.
What parts can replace 480041?
There are 2 known substitutes for 480041: 5156309, 00044. Substitute compatibility should be verified for your specific system.
What is the NSN for 480041?
480041 is cataloged in the U.S. Government catalog under NSN 5330-00-298-0389. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 480041