PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 48-81465
48-81465 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, hole_diameter: 0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN, overall_length: 1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-105-3917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
48-81465
NSN: 5330-01-105-3917
FSC: 5330
CAGE: 07700 — TECHNICAL WIRE PRODUCTS, LLC DBA TWP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
hole_diameter0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
overall_length1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
cross-sectional_thickness0.030 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL
center_to_center_distance_between_bolt_holes_along_width1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-105-3917
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 48-81465 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.030 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
APERTURE DIAMETER1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.030 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALALUMINUM ALLOY OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
714310-16Interchangeable
interchangeable cross-reference
interchangeable
76153-008Interchangeable
interchangeable cross-reference
interchangeable
1105621-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 48-81465?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 48-81465?
48-81465 is a GASKET.
What parts can replace 48-81465?
There are 3 known substitutes for 48-81465: 714310-16, 76153-008, 1105621-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 48-81465?
48-81465 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-105-3917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 48-81465

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026