PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 479AND472A
479AND472A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.9230 INCHES NOMINAL IN, cone_width: 1.1420 INCHES NOMINAL IN, bore_diameter: 2.6250 INCHES NOMINAL IN, overall_width: 1.1418 INCHES NOMINAL IN, standout_width: 0.2188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-4169, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
479AND472A
NSN: 3110-00-100-4169
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.9230 INCHES NOMINAL IN
cone_width1.1420 INCHES NOMINAL IN
bore_diameter2.6250 INCHES NOMINAL IN
overall_width1.1418 INCHES NOMINAL IN
standout_width0.2188 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0930 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter4.7244 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-4169
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 479AND472A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.1420 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0930 INCHES NOMINAL IN
•
CUP WIDTH: 0.9230 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 4.7244 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.2188 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH1.1420 INCHES NOMINAL IN
CONE CORNER RADIUS0.0930 INCHES NOMINAL IN
CUP WIDTH0.9230 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER4.7244 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH1.1418 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
STANDOUT WIDTH0.2188 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
11816Interchangeable
interchangeable cross-reference
interchangeable
A11816Interchangeable
interchangeable cross-reference
interchangeable
305.40Interchangeable
interchangeable cross-reference
interchangeable
6515NCM093376Interchangeable
interchangeable cross-reference
interchangeable
11816-101Interchangeable
interchangeable cross-reference
interchangeable
10158010Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 479AND472A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 479AND472A?
479AND472A is a BEARING,ROLLER,TAPERED.
What parts can replace 479AND472A?
There are 8 known substitutes for 479AND472A: 11816, A11816, 305.40 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 479AND472A?
479AND472A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-4169. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 479AND472A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026