PartsTable
Technical Data Sheet
Download PDF

47996 — O-RING

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

47996: O-RING.

- For digital reception of satellite programmes, e.g. Astra, Eutelsat or Türk-Sat - For connecting several digital receivers in combination with Hama multi-switches 4/4, 5/4, 9/4 or 9/8 (not included in the delivery package) - Ideal for HDTV - Suitable for 3D TVs - Excellent values for cross polarization, decoupling, linear noise figure and amplification over the full reception area - Low power consumption - Rubberized housing - Cooling fins for optimized heat dissipation - Feedhorn foil for improved signal transfer - 5 year function warranty - Colour: black This part is cataloged in the U.S. Government catalog under NSN 5331-00-832-8616, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
47996
NSN: 5331-00-832-8616
FSC: 5331 — O-ring
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter2.602 INCHES MINIMUM AND 2.622 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-832-8616
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 47996 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.602 INCHES MINIMUM AND 2.622 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.602 INCHES MINIMUM AND 2.622 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 4
2434734Reference document
Same NSN cross-reference
Reference document — Secondary reference
292438NSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
745-292438NSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
745-292438Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 47996?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47996?
47996 is a O-RING manufactured by Hama.
What parts can replace 47996?
There are 4 known substitutes for 47996: 2434734, 292438N, 745-292438N and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 47996?
47996 is cataloged in the U.S. Government catalog under NSN 5331-00-832-8616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47996