PartsTable
Technical Data Sheet
Download PDF

47993 — ARM,STEERING GEAR

✓ Government record, cited
Hama · BOLT SCREW
PRODUCT OVERVIEW

47993: ARM,STEERING GEAR.

- For digital reception of satellite programmes, e.g. Astra, Eutelsat or Türk-Sat - To connect a digital receiver - Ideal for HDTV - Suitable for 3D TVs - Excellent values for cross polarization, decoupling, linear noise figure and amplification over the full reception area - Low power consumption - Rubberized housing - Cooling fins for optimized heat dissipation - Feedhorn for improved signal transfer - 5 year function warranty - Ideal in combination with Hama multi-switches 4/4, 5/4, 9/4 or 9/8 (not included) - Colour: black - Technical details: - Feedhorn diameter: 40 mm - 13 V/18 V vertical/horizontal switching - 22 kHz switching between low-/high-band - Input frequency: 10.7 - 12.75 GHz - Oscillator frequency: L1: 9.75 GHz/L2: 10.6 GHz - Output frequency: 950 - 2050 MHz/1100-2150 MHz - Gain: 60 - 64dB (typ). - Noise factor: 0.2 dB (typ.) - Power consumption: 130 mA (typ.) This part is cataloged in the U.S.

Government catalog under NSN 5306-00-082-5161, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
47993
NSN: 5306-00-082-5161
NIINs: 000825161, 010712813, 010805472, 013029880, 014723923
FSC: 5306 — Bolts
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
design_typeSTRAIGHT
special_featuresMATERIAL IS CAST IRON; NHA NSN 4120-01-442-3543 MODEL MA-3D AIR CONDITIONER; MFR'S NAME FOR ITEM IS "LATCH"
end_item_identificationB-1 SUPPORT EQUIPMENT
drag_link_end_characteristicW/BALL STUD BORE
sector_shaft_mounting_end_overall_width8.000 INCHES NOMINAL IN
sector_shaft_mounting_end_serrated_boreNOT INCLUDED
center_to_center_distance_between_ball/ball_stud_hole_and_sector_shaft_bore17.190 INCHES NOMINAL IN
NSN5306-00-082-5161
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 47993 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.200 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.610 INCHES MINIMUM IN
•
HEAD STYLE: HEXAGON
•
WIDTH BETWEEN FLATS: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.200 INCHES NOMINAL IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.610 INCHES MINIMUM IN
HEAD STYLEHEXAGON
WIDTH BETWEEN FLATS0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD CLASS2A A
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
92CX140Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 47993?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47993?
47993 is a ARM,STEERING GEAR manufactured by Hama.
What parts can replace 47993?
There is 1 known substitute for 47993: 92CX140. Substitute compatibility should be verified for your specific system.
What is the NSN for 47993?
47993 is cataloged in the U.S. Government catalog under NSN 5306-00-082-5161. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47993