PartsTable
Technical Data Sheet
Download PDF

4788614-0158 — TURNBUCKLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4788614-0158: TURNBUCKLE.

The TURNBUCKLE is a the manufacturer industrial component. Key specifications include length: 23.000 INCHES NOMINAL IN, material: STEEL OVERALL, end_style: CLEVIS AND CLEVIS, body_style: FLAT OPEN BUCKLE, fork_width: 1.750 INCHES NOMINAL IN, body_length: 9.120 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-227-1601, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4788614-0158
NSN: 5340-01-227-1601
FSC: 5340 — Hardware, Commercial
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
length23.000 INCHES NOMINAL IN
materialSTEEL OVERALL
end_styleCLEVIS AND CLEVIS
body_styleFLAT OPEN BUCKLE
fork_width1.750 INCHES NOMINAL IN
body_length9.120 INCHES NOMINAL IN
thread_class1B BODY
pinhole_diameter1.130 INCHES NOMINAL IN
take-up_distance6.000 INCHES NOMINAL IN
nominal_thread_size1.250 INCHES BODY IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) BODY
furnished_items_and_quantity2 BOLT AND 2 NUT
NSN5340-01-227-1601
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4788614-0158 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FURNISHED ITEMS AND QUANTITY: 2 BOLT AND 2 NUT
•
TAKE-UP DISTANCE: 6.000 INCHES NOMINAL IN
•
LENGTH: 23.000 INCHES NOMINAL IN
•
BODY STYLE: FLAT OPEN BUCKLE
•
END STYLE: CLEVIS AND CLEVIS
•
NOMINAL THREAD SIZE: 1.250 INCHES BODY IN
•
BODY LENGTH: 9.120 INCHES NOMINAL IN
•
FORK WIDTH: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FURNISHED ITEMS AND QUANTITY2 BOLT AND 2 NUT
TAKE-UP DISTANCE6.000 INCHES NOMINAL IN
LENGTH23.000 INCHES NOMINAL IN
BODY STYLEFLAT OPEN BUCKLE
END STYLECLEVIS AND CLEVIS
NOMINAL THREAD SIZE1.250 INCHES BODY IN
BODY LENGTH9.120 INCHES NOMINAL IN
FORK WIDTH1.750 INCHES NOMINAL IN
PINHOLE DIAMETER1.130 INCHES NOMINAL IN
THREAD CLASS1B BODY
SUBSTITUTES & CROSS-REFERENCES 3
G-228 1 1/4X6Reference document
Same NSN cross-reference
Reference document — Secondary reference
521-4788614 PIECE 158Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HG-228 1 1/4X12Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4788614-0158?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4788614-0158?
4788614-0158 is a TURNBUCKLE.
What parts can replace 4788614-0158?
There are 3 known substitutes for 4788614-0158: G-228 1 1/4X6, 521-4788614 PIECE 158, HG-228 1 1/4X12. Substitute compatibility should be verified for your specific system.
What is the NSN for 4788614-0158?
4788614-0158 is cataloged in the U.S. Government catalog under NSN 5340-01-227-1601. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4788614-0158