47870: BEARING,BALL,ANNULAR.
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.
A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions. Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30 This part is cataloged in the U.S.
Government catalog under NSN 5315-00-209-7273, indicating validated use in U.S. government and defense logistics supply chains.
| material | UNABLE TO DECODE |
| point_type | SPLIT |
| point_angle | 135.0 DEGREES NOMINAL |
| shank_style | STRAIGHT ROUND |
| flute_length | 57.0 MILLIMETERS NOMINAL MM |
| flute_quantity | 2 |
| overall_length | 3.6614 INCHES NOMINAL IN |
| shank_diameter | 6.0 MILLIMETERS NOMINAL MM |
| cutting_end_style | GENERAL PURPOSE |
| nominal_cutting_diameter | 6.0 MILLIMETERS MM |
| cutting_rotation_direction | RIGHT-HAND |
| specification/standard_data | 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| NSN | 5315-00-209-7273 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | STANDARD |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM E30 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| DIAMETER | 0.220 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| UNDERLOOP LENGTH | 1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN |
| MATERIAL | STEEL OVERALL |
| POINT TYPE | EXTENDED PRONG SQUARE CUT |