PartsTable
Technical Data Sheet
Download PDF

4785070-6 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4785070-6: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 OVERALL, nut_style: HEXAGON, nut_height: 0.312 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNEF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-410-3109, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4785070-6
NSN: 5310-00-410-3109
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 1212 OVERALL
nut_styleHEXAGON
nut_height0.312 INCHES NOMINAL IN
thread_class2B
thread_seriesUNEF
thread_directionRIGHT-HAND
countersink_angle45.0 DEGREES NOMINAL NUT
width_across_flats1.9062 INCHES NOMINAL IN
nominal_thread_size0.812 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch20
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-410-3109
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4785070-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.9062 INCHES NOMINAL IN
•
THREAD SERIES: UNEF
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.812 INCHES IN
•
NUT HEIGHT: 0.312 INCHES NOMINAL IN
•
COUNTERSINK ANGLE: 45.0 DEGREES NOMINAL NUT
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.9062 INCHES NOMINAL IN
THREAD SERIESUNEF
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.812 INCHES IN
NUT HEIGHT0.312 INCHES NOMINAL IN
COUNTERSINK ANGLE45.0 DEGREES NOMINAL NUT
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH20
SUBSTITUTES & CROSS-REFERENCES 2
4785070Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
33050Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4785070-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4785070-6?
4785070-6 is a NUT,PLAIN,HEXAGON.
What parts can replace 4785070-6?
There are 2 known substitutes for 4785070-6: 4785070, 33050. Substitute compatibility should be verified for your specific system.
What is the NSN for 4785070-6?
4785070-6 is cataloged in the U.S. Government catalog under NSN 5310-00-410-3109. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4785070-6