PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4779-5

4779-5 — Technical Data Sheet

✓ Verified by PartsTable
Lindy · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Cat.6 S/FTP Flat network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br>Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emissio This part is cataloged in the Federal Logistics Information System under NSN 5306-00-208-5080, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
4779-5
NSN: 5306-00-208-5080
FSC: 5306
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BODY
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
head_styleHEXAGON
shaft_typeROUND SINGLE ACTUATOR
flat_height0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
power_rating2.0 WATTS AVERAGE AND 200.0 WATTS PEAK
shaft_length0.500 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
pole_quantity2 SINGLE SECTION FRONT
terminal_typeTAB, SOLDER LUG
thread_length0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
NSN5306-00-208-5080
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4779-5 · Lindy ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.000 INCHES MINIMUM IN
•
THREAD QUANTITY PER INCH: 24
•
HARDNESS RATING: 95.0 ROCKWELL B MAXIMUM OVERALL
•
HEAD STYLE: HEXAGON
•
SURFACE TREATMENT: CADMIUM OVERALL
•
THREAD CLASS: 2A A
•
WIDTH BETWEEN FLATS: 0.544 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
THREAD LENGTH1.000 INCHES MINIMUM IN
THREAD QUANTITY PER INCH24
HARDNESS RATING95.0 ROCKWELL B MAXIMUM OVERALL
HEAD STYLEHEXAGON
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS2A A
WIDTH BETWEEN FLATS0.544 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
144631-DH1CInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
144631-H1CInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2107-5InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
263-5DBInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
20-808500-26InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2C628InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4779-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4779-5?
4779-5 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Lindy.
What parts can replace 4779-5?
There are 8 known substitutes for 4779-5: 144631-DH1C, 144631-H1C, 2107-5 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4779-5?
4779-5 is cataloged in the Federal Logistics Information System under NSN 5306-00-208-5080. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4779-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026