4779-4 — SEAL ASSEMBLY,SHAFT,SPRING LOADE

✓ Government record, cited

Lindy · ORING SEAL

PRODUCT OVERVIEW

4779-4: SEAL ASSEMBLY,SHAFT,SPRING LOADE.

Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector.

They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.

The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

Available colours: Blue, Red, Green, Yellow, Black, White, Orange, Purple, Grey. This part is cataloged in the U.S. Government catalog under NSN 5340-00-217-9311, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS

4779-4

NSN: 5340-00-217-9311
NIINs: 002179311, 002967059, 010098595, 014495415
FSC: 5340 — Hardware, Commercial
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)

SPECIFICATIONS

material	IRON MALLEABLE OVERALL
body_style	ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
end_radius	0.500 INCHES NOMINAL IN
shaft_type	ROUND SINGLE ACTUATOR
power_rating	2.0 WATTS AVERAGE AND 200.0 WATTS PEAK
shaft_length	0.500 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
overall_width	3.812 INCHES NOMINAL IN
pole_quantity	1 SINGLE SECTION FRONT
terminal_type	TAB, SOLDER LUG
thread_length	0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_length	1.240 INCHES MAXIMUM IN
NSN	5340-00-217-9311

COMPONENT DIAGRAM

KEY FEATURES

•

FORK SPAN WIDTH: 3.000 INCHES MINIMUM AND 3.005 INCHES MAXIMUM IN

•

END RADIUS: 0.500 INCHES NOMINAL IN

•

MATERIAL: IRON MALLEABLE OVERALL

•

DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 4.250 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

FORK SPAN WIDTH	3.000 INCHES MINIMUM AND 3.005 INCHES MAXIMUM IN
END RADIUS	0.500 INCHES NOMINAL IN
OVERALL WIDTH	3.812 INCHES NOMINAL IN
SPECIAL FEATURES	TWO 0.875 INCH DIA HOLES ON BOTH SIDES OPPOSITE CLEVIS END IN
MATERIAL	IRON MALLEABLE OVERALL
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END	4.250 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 6

D69930Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

07-202132Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

69930Reference document

Same NSN cross-reference

Reference document — Secondary reference

8A6316Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AB0070202132Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

202132Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 4779-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 4779-4?

4779-4 is a SEAL ASSEMBLY,SHAFT,SPRING LOADE manufactured by Lindy.

What parts can replace 4779-4?

There are 6 known substitutes for 4779-4: D69930, 07-202132, 69930 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 4779-4?

4779-4 is cataloged in the U.S. Government catalog under NSN 5340-00-217-9311. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

4779-4 — SEAL ASSEMBLY,SHAFT,SPRING LOADE

Request a Quote — 4779-4