PartsTable
Technical Data Sheet
4779 ✓ Verified by PartsTable
PanzerGlass · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

Protect your phone from the hazards of everyday life with a PanzerGlass® screen protector. Accidental bumps against sharp-edged dangers in your pocket or crushing falls onto stone-hard pavements are no match for this scratch and shock-resistant screen protector, which provides high-level drop protection. It even has a smudge-free coating with antibacterial effect that reduces traces of fingerprints and kills up to 99.99% of all common surface bacteria.<br><br>Installation is easy peasy.

Usually one attempt is enough, and should you need more, don’t worry: the screen protector can be re-installed up to 200 times. And once it’s applied, you’ll never again fear the sight of your phone tumbling to the ground. This may not happen, but if it does, you’ll regret not having clicked “add to cart”.<br><br>The Ultra-Wide Fit screen protector covers the entire front surface of your phone, while still leaving room for a case.

It provides a complete and crystal-clear view of your screen and comes in This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-080-3244, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 4779
NSN: 4730-00-080-3244
FSC: 4730
CAGE: 92023 — PITTSFIELD PRODUCTS INC (USA)
SPECIFICATIONS
length5.970 INCHES MINIMUM AND 6.031 INCHES MAXIMUM IN
diameter0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL COMP 302
mesh_size80.0
body_length1.781 INCHES NOMINAL IN
constructionONE-PIECE
body_diameter0.312 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
terminal_typeWIRE LEAD
wire_diameter0.00575 INCHES NOMINAL IN
inclosure_typeENCAPSULATED
outside_diameter0.843 INCHES MINIMUM AND 0.858 INCHES MAXIMUM IN
NSN4730-00-080-3244
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 4779 · PanzerGlass ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STYLE DESIGNATOR: CYLINDRICAL
ELEMENT OUTSIDE DIAMETER: 2.250 INCHES MINIMUM AND 2.312 INCHES MAXIMUM IN
WIRE DIAMETER: 0.00575 INCHES NOMINAL IN
FIRST END FLANGE THICKNESS: 0.040 INCHES MINIMUM AND 0.055 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MESH SIZE: 80.0
FILTERING MEDIA DESIGN: MESH
END CONNECTION TYPE: PLAIN SECOND END
LENGTH: 5.970 INCHES MINIMUM AND 6.031 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCYLINDRICAL
ELEMENT OUTSIDE DIAMETER2.250 INCHES MINIMUM AND 2.312 INCHES MAXIMUM IN
WIRE DIAMETER0.00575 INCHES NOMINAL IN
FIRST END FLANGE THICKNESS0.040 INCHES MINIMUM AND 0.055 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MESH SIZE80.0
FILTERING MEDIA DESIGNMESH
END CONNECTION TYPEPLAIN SECOND END
LENGTH5.970 INCHES MINIMUM AND 6.031 INCHES MAXIMUM IN
MATERIALSTEEL AND COPPER ALLOY
END CONNECTION TYPEFLANGED FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
90J47RInterchangeable
interchangeable cross-reference
interchangeable
4779Interchangeable
interchangeable cross-reference
interchangeable
S316H640CInterchangeable
interchangeable cross-reference
interchangeable
5340PL1843202Interchangeable
interchangeable cross-reference
interchangeable
5340PL1683054Interchangeable
interchangeable cross-reference
interchangeable
TA11C44D09TInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4779?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4779?
4779 is a RESISTOR,FIXED,WIRE WOUND,INDUCT manufactured by PanzerGlass. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4779?
There are 13 known substitutes for 4779: 90J47R, 4779, S316H640C and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4779?
4779 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-080-3244. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4779