PartsTable
Technical Data Sheet
47703 ✓ Verified by PartsTable
Lindy · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br>Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.<br>Available colours: Blue, Red, Green, Yellow, Black, White, Orange, Purple, Grey.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-022-2748, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
47703
NSN: 4730-00-022-2748
FSC: 4730
CAGE: 78357 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV QUICK COUPLER DIVISION (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
point_typeCONVENTIONAL
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.216 INCHES NOMINAL SINGLE ACTUATOR IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length2.875 INCHES NOMINAL IN
shaft_length0.562 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
overall_width0.311 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
pole_quantity1 EACH SECTION FRONT
terminal_typeCLIP
NSN4730-00-022-2748
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 47703 · Lindy ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
4730PL0970333Interchangeable
interchangeable cross-reference
interchangeable
1404076Interchangeable
interchangeable cross-reference
interchangeable
S6PHN4-4-56Interchangeable
interchangeable cross-reference
interchangeable
70-10023Interchangeable
interchangeable cross-reference
interchangeable
5739Interchangeable
interchangeable cross-reference
interchangeable
40676Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 47703?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47703?
47703 is a PANEL,ELECTRICAL-ELECTRONIC EQUI manufactured by Lindy.
What parts can replace 47703?
There are 14 known substitutes for 47703: 4730PL0970333, 1404076, S6PHN4-4-56 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 47703?
47703 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-022-2748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47703