PartsTable
Technical Data Sheet
4770-3 ✓ Verified by PartsTable
Lindy · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br>Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.<br>Available colours: Blue, Red, Green, Yellow, Black, White, Orange, Purple, Grey.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-022-2748, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
4770-3
NSN: 4730-00-022-2748
FSC: 4730
CAGE: 78357 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV QUICK COUPLER DIVISION (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
point_typeCONVENTIONAL
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.216 INCHES NOMINAL SINGLE ACTUATOR IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length2.875 INCHES NOMINAL IN
shaft_length0.562 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
overall_width0.311 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
pole_quantity1 EACH SECTION FRONT
terminal_typeCLIP
NSN4730-00-022-2748
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 4770-3 · Lindy ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
4730PL0970333Interchangeable
interchangeable cross-reference
interchangeable
1404076Interchangeable
interchangeable cross-reference
interchangeable
S6PHN4-4-56Interchangeable
interchangeable cross-reference
interchangeable
70-10023Interchangeable
interchangeable cross-reference
interchangeable
5739Interchangeable
interchangeable cross-reference
interchangeable
40676Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4770-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4770-3?
4770-3 is a PANEL,ELECTRICAL-ELECTRONIC EQUI manufactured by Lindy.
What parts can replace 4770-3?
There are 14 known substitutes for 4770-3: 4730PL0970333, 1404076, S6PHN4-4-56 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4770-3?
4770-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-022-2748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4770-3