Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br>Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications.
These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.<br>Available colours: Blue, Red, Green, Yellow, Black, White, Orange, Purple, Grey.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-091-3485, indicating validated use in U.S. government and defense logistics supply chains.
| diameter | 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN |
| material | STEEL OVERALL |
| body_style | ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE |
| bore_shape | STRAIGHT |
| power_rating | 2.0 WATTS AVERAGE AND 200.0 WATTS PEAK |
| tip_quantity | 1 |
| bore_diameter | 30.00 MILLIMETERS NOMINAL MM |
| contact_angle | 25.0 DEGREES MAXIMUM |
| overall_width | 16.0 MILLIMETERS NOMINAL MM |
| load_direction | ANGULAR |
| overall_length | 1.280 INCHES NOMINAL IN |
| surface_finish | GROUND |
| NSN | 5340-00-091-3485 |
| MATERIAL | ALUMINUM ALLOY 2024 BAND |
| OVERALL WIDTH | 0.500 INCHES NOMINAL IN |
| MATERIAL | PLASTIC TETRAFLUOROETHYLENE CUSHION |
| SURFACE TREATMENT | ANODIZE BAND |
| STYLE DESIGNATOR | OFFSET MOUNT |
| DIAMETER | 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN |
| LOOP INSIDE DIAMETER | 1.423 INCHES MINIMUM AND 1.453 INCHES MAXIMUM IN |
| CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 1.142 INCHES NOMINAL IN |
| MATERIAL THICKNESS | 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN |
| DISTANCE FROM LOOP CENTER TO TONGUE END | 1.360 INCHES NOMINAL IN |